How to Make Picture Frame Easel Backs
Making picture frame easel backs can be a bit tricky. There are several factors that need to be considered before making your own design. At first, it can seem like an overwhelming task, but in reality, it’s not that difficult once you break it down into easy-to-follow steps. In this guide, we will show you everything from the materials you’ll need and how to make picture frame easel backs.
What is a Picture Frame Easel Back?
A picture frame easel back is a support that allows your frame to stand up on its own. It’s typically used for large or heavy frames that can’t be displayed on a shelf or hung on a wall. The great thing about picture frame easel backs is that they can be custom-made to any size and shape.
Materials You’ll Need
First things first, you’ll need to gather all the materials you need before getting started. For this project, you will need:
• A piece of wood (we recommend using plywood)
• A jigsaw
• Sandpaper
• A hammer
• Nails
• Measuring Tape
• A drill
Know More: 7 Best Picture Frame Clamps for Perfect Gluing or Drilling
How to Make a Picture Frame Easel Back
1. Start by cutting 3 pieces of plywood. 2 pieces should be longer than the frame, and another one should be the same width as the picture frame.
2. Next, take the two longer pieces of plywood and attach one side of them together using the nails or screws.
3. Once the two pieces are attached, sand down the edges to make sure they are smooth.
4. Now it’s time to attach the third piece of plywood to the other 2. This piece should be attached at the bottom so that it forms a triangle.
5. To make sure the picture frame easel back is sturdy, reinforce the joints by nailing them together.
6. If you want that the frame easel should stand independently, then you have to attach one more stand behind it. To do this, simply take the fourth piece of plywood and cut it to the same size as the previous 2 pieces. Attach these pieces to the back of the frame easel using screws or nails.
7. The final step is to paint or stain the wood to match the frame. Let it dry completely before using it.
No, attach your frame to the easel back using screws or nails, and your picture frame easel is complete!
Tips & Warnings When Making Picture Frame Easel Backs
- Always use caution when working with power tools.
- If you’re not using plywood, make sure the wood is strong enough to support the frame.
- Make sure the joints are secure and reinforced before moving on to the next step.
- Use paint or a sealant to protect the wood from moisture damage.
Conclusion
Making picture frame easel backs is a great way to display your photos or artwork. By following the simple steps in this guide, you can make your own custom easel back in no time. Just remember to use caution when working with power tools and to reinforce the joints for a sturdy frame.